Print This Page

  

Spray Buff & Polish
Stripping floor finish

Cleaning baseboards

Restoring marble floors

Changed to 13 inch  model

 

CENTAUR

RABBIT 3

Patented, High-Speed Floor Machine
(Two speed, 200 and 300 rpm)


The Rabbit-3, with built-in splashguard, is an innovative and unique floor machine, totally new to the floor cleaning industry. The Rabbit-3 is versatile, durable and reliable.
 

Specifications:

Full size model 20 (with Splashguard): 18"dia. block
Small model 13 (Splashguard removed): 13"dia. block
Motor: 1½ HP operating at high speed
Motor: ¾ HP operating at low speed
Motor type: DC rectified with 4 carbon brushes
Noise level of machine: (A) scale at 3m -63 dB
Machine weight: 89 lbs. or 40 kg
Extra available weight: 20 lbs. or 9 kg
Splashguard material: soft polyethylene
Brush or Block speed: slow - 200 rpm fast - 300 rpm
Water tank capacity: 4 US gallon or 16 litre
Water flow direction (from water tank): down onto brush or, with valve turned, sideways onto Scrub Jay
Time to remove Splashguard: 30 seconds
Baseboard cleaning time: 6 to 10 times faster than cleaning by hand

SWIFT 2000 rpm

Swift - floor burnisher with hover feature to eliminate surface burning at start-up. Used for professional large scale hard floor polishing in hospitals, schools, universities and shopping centers. Dust collector prevents dust from rising and settling on shelving, stock and furniture.

Specifications:

• Pad revolution - under load: 2000 rpm
• Pad diameter and Path width: 20 inch
• Motor - direct current: 1.5 hp
• Weight: 101 lbs / 46 kg
• Cable length: 100 ft / 30 m
• Pad pressure (adjustable):
   12 lbs to 14 lbs
• Automatic pad pressure adjustment: Yes
• Dust collector system: Yes
• Protecting fuse: 14 amp
• Ampere draw:
   Minimum 12 - Maximum 15

 

HUSKY

SWIFT 2000 rpm

Buff
Scrub
Wash
Strip
Sand floor
Restoration of natural stone's floor
1 and/or 2 speeds (175 / 350 rpm) :

All steel planetary 3 idlers gear unit, sealed in oil bath, ensures better weight distribution, greater stability and minimum vibration.

Handle locking mechanism can be operated by hand and foot adjustable to any height and from 90o to 180o for easier access to hard to reach areas.

Lifetime warranty on polyethylene motor housing.

Regular and dual speeds models are available in 17" & 20" sizes, others sizes are available on special order.


Ultra high speed (electric or propane 1 000 and 3 200 rpm):

Operate six times faster than conventional floor machines.
Cast iron pulley with "V" belt drive
1" motor drive shaft mounted on permanently lubricated bearings.
Onan motor on liquid propane

 

 

 

Baseboard Machine

Coming Soon

 

 

 

Propane Burnishers

Coming Soon

 

 

 

Husky Autoscrubber

All Husky autoscrubbers are equipped with either nylon brushes or driving pads that could meet any floor cleaning tasks.

All Husky autoscrubbers have their independent drive traction system.

Simple reliable mechanical system.

The polyethylene lifetime warranty recovery and solution reservoirs resist impact and corrosion (exception of the H240BF which is in stainless).

A flexible discharge hose will reach any drain or bucket. (exception of the Unica 2000)

Solution is metered at the centre of the brushes, providing proper cleaning with less solution.

Models

H180-B

H200E

H210F
Work capacity per hour

1 500 ft2
(1 647 m2)

17 222 ft2
(1 595 m2)

16 220 ft2
(1 800 m2)

Scrubpath

18 in
(46 cm)

21 in
(53 cm)

21 in
(54 cm)
Squeegee width

23 in
(58 cm)

32 in
(80 cm)

29,5 in
(75 cm)
Brush diameter

2 X 9 in
(2 X 230 cm)

21 in
(53 cm)

2 x 11 in
(2 x 280 mm)
Brush speed

360 RPM

-

170 RPM
Self propelled

Forward

Brush driven

Forward
Brush motor

3/4 h.p.

1000 watts

2 x 1/4 h.p.
Vacuum motor

1.5/8 h.p. - Special bypass

1000 watts

1.5/8 h.p. - Special bypass
Brush pressure

65 lb
(30 kg)

99 lb
(45 kg)

65 lb
(30 kg)
Solution & recovery tank

6,6 gal / 6,6 gal
(30L / 30L)

14 gal / 12 gal
(65L / 55L)

12,3 gal/12,3 gal
(56L / 56L)
Dimension lenght/width/
height

29 in x 23 in x 33 in
(740 mm x 580 mm x 840 mm)

44 in x 25,6 in x 40 in
(110 cm x 64 cm x 100 cm)

40 in x 25 in x 30 in
(104 mm x 630 mm x 1 760 mm)

The squeegee is swing-mounted to dry even the most difficult surfaces, while its swivel action provides complete suction on turns.

Each unit features simplified maintenance with easy access to all mechanical parts.

Husky has built its reliability for over 30 years on a tested mechanical system that is constantly improved. Mechanical components do not need over qualified technicians to repair or fix when needed. It assures low maintenance cost during the entire life of the equipment and give it a life cycle that has become the Husky hallmark. (exception: the Unica 2000 and 32" are equiped with hydraulic)

Models

H240BF

H-260BF

Unica 2000
 (30 in)
Work capacity per hour

22 500 ft2
(2 500 m2)

22 500 ft2
(2 500 m2)

37 660 ft2
(3 487 m2)
Scrubpath

24 in
(60 cm)

26 in
(66 cm)

30 in
(75 cm)
Squeegee width

30 in
(76 cm)

32 in
(80 cm)

36 in
(90 cm)
Brush diameter

2 x 13 in
(2 x 330 mm)

2 x 14 in
(2 x 350 mm)

2 x 15 in
(2 x 365 mm)
Brush speed

320 RPM

280 RPM

160 RPM
Self propelled

Forward/reverse

Forward/reverse

Forward/reverse
Brush motor

2 x 1/2 h.p.

2 x 1/2 h.p.

2 x 500 watts
36 volts
Vacuum motor

1.5/8 h.p. - Special bypass

1.5/8 h.p. - Special bypass

1 x 1 200 watts  36 volts
Brush pressure

0-210 lb
(0-95 kg)

0-165 lb
(0-75 kg)

143 lb
(65 kg)
Solution & recovery tank

18 gal / 18 gal
(65L / 65L)

15 gal / 15 gal
(65L / 65L)

49 gal / 43 gal
(225L / 195L)
Dimension lenght/width/
height

60 in x 28 in x 39 in
(1 500 mm x 710 mm x 980 mm)

49 in x 33 in x 37 in
(1 250 mm x 840 mm x 944 mm)

57 in x 28 in x 56 in
(1 425 mm x 710 mm x 1 400 mm)

 

Sweeper

The new items : our line of powered sweepers

Eliminate completely the dust
Combine action of suction and sweeping
Very easy to handle because of the short axle in between the wheels
Gas or batteries powered
Polypropylene central brush
Turbine suction at free flux
Great efficiency, constant speed
Self propelled
Cartridge filter

Models

SP5000

SP5000B

SP6000B
Work capacity per hour 22500 ft2 / 30000 ft2
(2084 m2 / 2778 m2) 		22500 ft2 / 30000 ft2
(2084 m2 / 2778 m2)		 30000 ft2 / 38000 ft2
(2778 m2 / 3520 m2)
Width with side brush

26 in 
(65 cm)

26 in 
(65 cm)

36 in 
(91,5 cm)
Recovery  capacity

10 gal 
(45L)

10 gal 
(45L)

11 gal 
(50L)
Filter surface

22 ft2 
(2 m2)

22 ft2 
(2 m2)

33 ft2 
(3 m2)
Engine or batteries

3,5  hp Briggs & Stratton

2 x 135 amp

2 x 135 amp
Power

Gaz

Battery

Battery
Weight

187 lb
(85 kg)

330 lb
(150 kg)

400 lb
(182 kg)